This is our Digital High Speed Video Equipment. You can observe machine material interactions that are not visible with the naked eye. You will be amazed at what your packaging or product has to put up with! When combined with our Machine Dynamic Motion Measurement Equipment, machine diagnostics becomes much easier. We then have objective data on which to base machine improvement recommendations. Recommendations that need not involve expensive re-design. The most common faults we observe are incorrect setup and worn components.
We can also capture an occasional jam - and you don't have to be around waiting for it! The system can be set up to continuously record. An input trigger signal will stop the recording - but the previous events remain in the system's memory. This becomes powereful when the trigger is received from your PLC, and your PLC signal is an output based on a fault condition you want to analyse.