Segment Editor: Parameters

MotionDesigner Help Contents - Search Index - Previous Topic in this Sequence - Next Topic in this Sequence

Segment Editor: Parameters
see also: Segment Editor: Range,Segment Editor: Width,Segment Editor: Segment Type

For many of the Segment types, there are some relevant parameters that you can edit to suit the motion design needs.

This Segment Type (the Sine-Constant-Cosine Segment Type) needs 3 parameters to fully define it.

Default values are provided for the segment type, if needed, so the segment will be as per a "Standard" form.

This example below shows a Sine-Constant-Cosine Segment, in red, that has its parameters (Sine, Constant and Cosine proportions) set to 0.2, 0.15 and 0.55 respectively.

Compare the red selected segment shape to the segment at the left of the motion, which is the same Segment Type but has different parameters set to it.

See each Segment Type for further details.